In you have been using the remote node in combination with the official Qwertycoin Desktop you may experience issues when switching back to local or automatic mode. It most cases the application will crash and a simple restart will solve the issue.

Some users report that restarting the wallet application results in yet another crash. If your get stuck in this loop don’t worry there is a simple fix using any text editor of your choice.

  1. Browse to you Qwertycoin data folder. Default on Windows is something like C:\Users\\AppData\Roaming\qwertycoin
  2. Open the GUI configuration file qwertycoinwallet.cfg using Notepad or any other editor
  3. Change the connectionMethod value to
    1. to use the Embedded node (default)
    2. to use the Local Daemon
    3. to use the configured remote node

That’s it. Start your wallet and things should be back to normal.

Qwertycoind can accept settings through a configuration file. This is the output of daemon’s help command on acceptable parameters:

all of the command line options can be defined through the configuration file.

Command line options:
  –helpProduce help message
  –versionOutput version information
  –data-dir argSpecify data directory
  –config-file arg(=qwertycoin.conf)Specify configuration file
Command line options and settings options:
  –log-file arg
  –log-level arg (=0)
  –no-consoleDisable daemon console commands
  –rpc-bind-ip arg (=
  –rpc-bind-port arg (=8197)
  –p2p-bind-ip arg (= for p2p network protocol
  –p2p-bind-port arg (=8196)Port for p2p network protocol
  –p2p-external-port arg (=0)External port for p2p network protocol (if port forwarding used with NAT)
  –allow-local-ipAllow local ip add to peer list, mostly in debug purposes
  –add-peer argManually add peer to local peerlist
  –add-priority-node argSpecify list of peers to connect to and attempt to keep the connection open
  –add-exclusive-node argSpecify list of peers to connect to and attempt to keep the connection open
  –seed-node argConnect to a node to retrieve peer addresses, and disconnect
  –hide-my-portDo not announce yourself as peerlist candidate
  –extra-messages-file argSpecify file for extra messages to include into coinbase transactions
  –start-mining argSpecify wallet address to mining for
  –mining-threads argSpecify mining threads count

If a parameter is defined in the config and was also indicated in the command line, two behaviors are possible. If the parameter accepts one value only (e.g., rpc-bind-ip), the command line value will be used, since it has a higher priority. If the parameter accepts several values (e.g., add-priority-node), then command line and configuration file values will be merged.

By default config file’s name is “qwertycoin.conf”, which is located in the binaries folder. However, you may adjust the destination to the file via “–config-file” option in the command line.

If some of the options are not defined in the config, the default values will be applied. Here’s the example of a possible configuration file:








To synchronize your Qwertycoin software with the network faster, you may download blockchain file.

  1. Unpack the downloaded blockchain archive.
  2. Move the extracted files blockindexes.dat and blocks.dat to the standard Qwertycoin folder (replace existing files if necessary):





Relaunch your Qwertycoin software.

Qwertycoin works through 2 separate binary files operated through command line:

  1. qwertycoind– daemon to synchronize the blockchain and mine qwertycoin.
  2. simplewallet – wallet to receive and send funds.

Install Qwertycoin

  1. Unzip the archive to one separate folder
  2. Download blockchain archive and unpack it to:





Launch Qwertycoin

  1. Open qwertycoind. For downloadable Linux archive use ./qwertycoind.
  2. Wait until qwertycoind is synchronized. You will be notified with several green “SYNCHRONIZED OK” messages.
  3. Open simplewallet. For downloadable Linux archive use ./simplewallet.

Daemon: synchronization & mining

After qwertycoind is launched you will have to wait until it is synchronized with the network. You will be notified with several green “SYNCHRONIZED OK” messages. Here are the most important daemon commands:

start_mining [threads=1]Start mining in several threads to a given wallet address
stop_miningStop mining
show_hrShow current mining hashrate
hide_hrStop showing current mining hashrate
helpShow all daemon commands
exitExit qwertycoind

Wallet: send and receive payments

Simplewallet can only be used after the daemon is launched and synchronized. Simplewallet automatically synchronizes with qwertycoind. Here are the most important wallet commands:

addressShow your wallet address
balanceShow current wallet balance

Send money to

with a mixing amount of
start_miningStart mining in daemon with several threads to the current wallet address
stop_miningStop mining in daemon
helpShow all wallet commands
exitExit simplewallet

Once you open Qwertycoin Wallet, it will automatically create your first Qwertycoin address and start synchronizing with the network.

It is highly recommended that you encrypt your new wallet with a password. Leaving the wallet unprotected makes it vulnerable in case your system is compromised.

To encrypt your wallet, choose “Settings” menu and then “Encrypt wallet”.

Wallet file format

Unlike Qwertycoin Reference Client, Qwertycoin Wallet uses .wallet files instead of legacy .keys files to store your private keys for each wallet.

Qwertycoin Wallet is able to import .keys files (with the existing password), but it will create a .wallet file for further operations.

Qwertycoin Wallet files

Qwertycoin Wallet introduces several new files stored in the standard Qwertycoin folder:





The most commonly used files are the following:

  • qwertycoinwallet.wallet – a default wallet keys file that is created on first startup of Qwertycoin wallet and gives access to your fresh Qwertycoin address.
  • qwertycoinwallet.log – a log file for the node that is running inside Qwertycoin Wallet.

Import your Paperwallet into Desktop Wallet with only a few clicks:

You Need:

Your paperwallet generated “Keys for GUI Wallet” to complete these Tutorial.

1. Open Qwertycoin Wallet and go to “File > Import private key“.

2. Paste here your “Keys for GUI Wallet”-key into these Popup and set your location where you wanna store your converted Walletfile.

If you set all click on OK


Desktop Wallet is now available.

Just go to Download Section and click on the specific Downloadlink for your Operationsystem.

We provide our GUI Wallet for Windows-64 Bit, MacOS and also for Linux.


Official Github Release Page:

Cryptonote coin’s wallets can operate through remote daemon without downloading blockchain. It allows to start working quickly when needed. It is quite safe as remote daemon can’t steal your coins, running own node is more secure of course. But these remote nodes are not rewarded anyhow in any CN coin.

So, basically, Masternode it is the CLI Qwertycoin daemon running on a machine with open port which allows to connect to it for such light wallets and, most important, mobile wallets in the future. Qwertycoin wallets, connected to Masternode, are paying small fees to that node when are sending transactions through it. These fees are supposed to help to cover the costs of operating Qwertycoin nodes.

These Masternodes are providing service necessary for mobile wallets, and besides are helping to maintain and enlarge Qwertycoin network. We have plans no incentivize such nodes even more in the future.

To start own Qwertycoin masternode all is needed is just a machine with static IP and open port. Machine should have enough CPU power to handle load when parsing blockchain for connected wallets, it can be even spare PC at home. On such machine you can run qwertycoin daemon specifying a wallet address where fees would go like this:

./qwertycoind --restricted-rpc --enable-cors=* --enable-blockchain-indexes --rpc-bind-ip= --rpc-bind-port=8197 --fee-address=QWC1L4aAh5i7cbB813RQpsKP6pHXT2ymrbQCwQnQ3DC4QiyuhBUZw8dhAaFp8wH1Do6J9Lmim6ePv1SYFYs97yNV2xvSbTGc7s

You can specify any wallet address, it can be your GUI wallet address, even paper wallet. This is the wallet where you will receive fees.
You need to make sure your port is open and not blocked by firewall. If you are running it at home behind router you need to do port forwarding.

If you have PC at home constantly running with fast connection and static IP and want to operate such Masternode to help Qwertycoin network, run daemon as in example and send ous your IP so We can add it do default nodes list.
You can check if your node is running opening its IP in browser like this

and you should see something like this


with your wallet address where fees should go.

You can also run Masternode on VPS with dedicated domain and publish here with description so people can add your node manually if they prefer it. It is not recommended to run node on VPS now specially for Qwertycoin, do it only when you already have spare VPS and it is idling.
For now, do not expect yet to earn a lot of fees because there is very low usage of such remote nodes.

Qwertycoin is a cryptocurrency designed for people and for everyday use. It improves upon the original Bitcoin blockchain and aims to fulfill its initial purpose of providing individuals and businesses with a fast, efficient and decentralized way of making direct transactions while maintaining your privacy.

Qwertycoin QWC is a cryptocurrency, a kind of decentralized digital money, like Bitcoin. It is based on CryptoNote anonymous technology.
Nobody owns or controls Qwertycoin, it uses peer-to-peer technology and fair ASIC-resistant PoW mining process to operate with no central authority.

Qwertycoin provides instant worldwide privacy protected transactions and untraceable encrypted payment transfers with almost zero processing fees in decentralized peer-to-peer users network. Mathematics secures the QWC network and empowers individuals to control their own finances and information.

Your private key is your bank account, with no censorship and surveillance.